| TECHNOLOGY |
Double conversion with the latest MPWM technology. Input Power Factor Controller |
| MODEL |
M11 |
| RATING |
1Φ Input – 1Φ Output |
| CAPACITY |
5 KVA – 10 KVA |
| DC BUS |
5 KVA | 6 KVA | 7.5 KVA | 10 KVA |
| INPUT |
|
| Input Voltage |
230 V AC, 1Φ |
| Input Voltage Window |
170 V AC – 270 V AC |
| Input Frequency |
50 Hz ± 10 % |
| Power walk in |
Soft start for 0-20 seconds power walk-in. |
| Input PFC |
0.99 on full load |
| Input current harmonic distortion (THD) |
< 3% @100 % Load |
| RECTIFIER |
|
| Voltage Regulation |
(+/-) 1% |
| Ripple Voltage |
< 2% without Battery |
| BATTERY- |
SMF |
| Charger Type |
CCCV |
| Charging Current Standard |
1 – 10 Amp. |
| INVERTER |
|
| Inverter Type |
IGBT based MPWM with instantaneous Sinewave Control 0.8 lag |
| Power Factor |
0.8 lag |
| Nominal Voltage |
230 V, 50 Hz |
| Regulation |
(+/-) 1% |
| Total Harmonic Distortion
Linear Load | Non Linear Load |
< 2% |
< 4% |
| Over Load Capacity |
125% -1 Minute, 150% 10 Seconds |
| Transient Response |
Output remains within +/- 5% & recover to normal within 20 msec |
| Bypass |
Auto bypass |
| EFFICIENCY |
|
| Efficiency- 100% load |
> 85% – 90% |
| Crest Factor |
3:1 |
| Mode of Operation |
Designed for Continuous operation |
| ISOLATION |
True Online with complete galvanic isolation for comprehensive power protection |
| LCD Display shows the following parameters |
• Input Voltage • Output Voltage • Load percentage • Output Frequency • Battery Voltage |
| Fault status display with latch |
• Mains on • Charger on • Inverter on • Battery Low • Overload • Inverter Trip |
| Fault status display with latch |
• Advanced Electronic Protection for device safety, backed up with MCB’s/ MCCBs & fast acting fuses
• High speed pulse by pulse electronic device protection • Electronic over current trip with reset.
• Input Under Voltage / Over Voltage • Rectifier Over Voltage
• Over Temperature. Over load. Battery low. Short circuit |
| ALARMS |
• Input low/ fail • Output Overload • Over Temperature • Battery low • Short circuit |
| Enclosure Protection |
IP – 20 |
| Cooling |
Forced air |
| Acoustic Noise level |
< 60db @ 1.5 meter |
| Operating ambient Temperature |
0 to 40 °C |
| Humidity |
Up to 95% RH Non condensing |
| Dimensions in mm D x H x W/ Wt in Kg |
550* 550* 200/45kgs 550* 550* 200/50kgs 550 550* 200/55kgs 600* 650* 240/70kgs |
